A new chapter 9 has been added to report KD 626 about the axial flux generator of the VIRYA-1.25AF. In this chapter the following measurements and conclusions are given for a steel stator sheet with a thickness of 3 mm. The sticking torque isn’t fluctuating for low rotational speeds. The pulling force in between the armature sheet and the stator sheet is 70 N. The rise of the stator temperature is 6 degrees C after running for 10 minutes at a rotational speed of 735 rpm. The power loss due to eddy currents in the stator sheet is only 8 W at the maximum loaded rotational speed of 650 rpm. The unloaded AC voltage for one coil with a test winding of 110 turns is 1.32 V for a rotational speed of 250 rpm, so the coils of the VIRYA-1 can also be used for the VIRYA-1.25AF.